LUNAMOON - Lollipop Base 13ml

Mandatory use of a Rubber Base layer, from which it is recommended to remove the sticky layer before applying Lollipop Base. For leveling long nails, prior strengthening with a harder material is mandatory. When leveling, follow the rule that the thickness at the edge of the nail should be approximately 0.5 mm. Easy removal by filing or with liquid.

60s for Rubber Base / 90–120s for Lollipop Base levelling layer in an original 36W–48W UV/LED lamp

1. Clean and prepare the nail plate with a dehydrator and primer.

2. Apply a thin base layer of LUNAMOON Rubber Base with a flat gel brush, using strokes that rub the material into all nail indentations, and cure for 60 seconds in a UV/LED lamp.

3. Wipe off the sticky layer (inhibition layer) from the Rubber Base.

4. Apply LUNAMOON Lollipop Base for levelling (thickness at the nail edge ~0.5 mm) and polymerise in the original UV/LED lamp (36–48 W) for 90 to 120 seconds.

5. If necessary, apply a top coat and polymerise.

For professional use only. Keep out of reach of children. Avoid contact with skin and eyes. In case of contact, rinse with plenty of water and seek medical advice. Keep away from direct sunlight and UV rays.