LUNAMOON - Glass Builder Gel nr6 15ml

Features:

1. Acid-free formula.
2. Medium consistency, slightly more fluid.
3. Does not stick to the brush and allows for easy application.
4. Excellent self-leveling properties.
5. Spreads evenly over the nail plate.
6. Does not flow during application.
7. Light texture reduces the possibility of air bubbles.
8. Suitable for strengthening natural nails.
9. Suitable for no-file extension technique.
10. Suitable for extensions with dual/top forms.
11. Impact-resistant and does not crack under mechanical stress.
12. Thickens in a cool environment, becomes more fluid in a warm one.
13. Can be slightly warmed if needed for an even more fluid consistency.
14. Does not cause a significant burning sensation during curing.

Important information:

1. Use it together with Rubber Base.
2. The thickness of the free edge must be at least 1 mm.
3. Initial curing: 10–15 seconds (depending on lamp power).
4. Recommended wavelength: 365–405 nm.
5. Recommended UV/LED lamp power: 36–48 W.
6. Maximum application thickness for one cure: up to 2 mm.
7. Full curing time: 120 seconds.
8. For applications thicker than 3 mm, apply the material in two layers with intermediate curing.

Instructions for use:

1. Remove previous application.
2. Shorten the natural nail to approximately 1 mm and shape it into a rounded form.
3. Gently buff the nail surface with a 220 grit file or use a 100 grit buffer.
4. Perform a manicure.
5. If using cuticle removers, wash hands with soap after use.
6. Degrease the nail with LUNAmoon Nail Prep in two steps:
   - first pass: clean the nail surface,
   - second pass: thoroughly clean the cuticle and nail grooves with a wipe wrapped around a wooden stick.
7. Apply LUNAmoon Primer.
8. Apply LUNAmoon Rubber Base with a flat gel brush using gentle circular motions, filling the nail grooves, and cure for 60 seconds.
9. Remove the dispersion layer.
10. Place the extension form.
11. Apply Glass Gel and shape the extension. Pre-cure for 30 seconds.
12. Shape the free edge and the final nail shape.
13. Remove the dispersion layer and dust.
14. Reapply LUNAmoon Rubber Base to the filed areas and cure for 60 seconds.
15. Level the Glass Gel, then cure in the lamp. Pinch the material after 10–15 seconds; if it is more elastic, after approximately 20 seconds.
16. Final cure for 120 seconds.
17. Before applying colored gel polish, remove the dispersion layer.
18. Apply gel polish if desired.
19. Finish with a top coat without a dispersion layer and cure for 120 seconds. Do not wipe the surface after curing to maintain high shine.