LUNAMOON - Glass Builder Gel nr2 15ml

Features:

1. Acid-free formula.
2. Medium-thick consistency, slightly more fluid.
3. Does not stick to the brush and allows for easy application.
4. Excellent self-leveling.
5. Spreads evenly over the nail plate.
6. Does not run during work.
7. Light texture reduces the possibility of air bubbles.
8. Suitable for strengthening natural nails.
9. Suitable for no-file extension technique.
10. Suitable for extension with dual/top forms.
11. Impact-resistant and does not crack under mechanical stress.
12. Thickens in a cold environment, becomes more fluid in a warm one.
13. If necessary, you can slightly warm it for an even more fluid consistency.
14. Does not cause a pronounced burning sensation during curing.

Important information:

1. Use in conjunction with Rubber Base.
2. The thickness of the free edge must be at least 1 mm.
3. Initial curing: 10–15 seconds (depending on lamp power).
4. Recommended wavelength: 365–405 nm.
5. Recommended UV/LED lamp power: 36–48 W.
6. Maximum application thickness for a single cure: up to 2 mm.
7. Full curing time: 120 seconds.
8. For applications thicker than 3 mm, apply the material in two layers with intermediate curing.

Instructions for use:

1. Remove previous application.
2. Shorten the natural nail to approximately 1 mm and shape it into a rounded form.
3. Gently matte the nail surface with a 220-grit file or use a 100-grit buffer.
4. Perform a manicure.
5. If using cuticle removers, wash your hands with soap after use.
6. Degrease the nail with LUNAmoon Nail Prep in two steps:
   - first pass: clean the nail surface,
   - second pass: thoroughly clean the cuticles and nail grooves with a wipe wrapped around a wooden stick.
7. Apply LUNAmoon Primer.
8. Apply LUNAmoon Rubber Base with a flat gel brush using gentle circular motions, filling the nail grooves, and cure for 60 seconds.
9. Remove the dispersion layer.
10. Place the extension form.
11. Apply Glass Gel and form the extension. Pre-cure for 30 seconds.
12. Shape the free edge and the final nail shape.
13. Remove the dispersion layer and dust.
14. Reapply LUNAmoon Rubber Base to the filed areas and cure for 60 seconds.
15. Even out the Glass Gel, then cure in the lamp. Pinch the material after 10–15 seconds; if it is more elastic, after approximately 20 seconds.
16. Final cure for 120 seconds.
17. Before applying colored gel polish, remove the dispersion layer.
18. If necessary, apply gel polish.
19. Finish with a top coat without a dispersion layer and cure for 120 seconds. Do not wipe the surface after curing to maintain high shine.